Control panels

All panels work with a very wide voltage input of 10.5-28V DC. The panel has a dip-switch which allows to change factory settings to your own wishes. This makes the panels suitable for all boat types. With the splitter cables a connection to a fly-bridge panel can be made very easily.

Features of the thruster controller:

Neoprene gasket
Perfect protection of the electrical parts by use of:
- Coated printed wiring board and rear cover to protect against humidity and salt air
- Large components glued to protect against vibrations.
Waterproof connectors IP 67. Latch lever lock, to ensure a 100% connection also in case of vibrations
Dip-switch for changing factory settings
Stainless bracket

The following functions are controlled by a microprocessor:

Visual and audible alarms
Automatic switch-off of the panel
- Switch-off after 30 minutes (factory setting)
- Switch-off after 60 minutes
- Switch-off after 120 minutes
- Don’t switch-off automatically
Time delay of 1 second
Protection against continuous operation of 2 minutes
Built-in temperature protection
Child protection
Wire break detection